📋 Electrician Trade Assessment Criteria २०२६
📘 Learning Outcomes & NOS Codes सह
📌 First Year व Second Year मधील सर्व Assessment Criteria – संपूर्ण माहिती मराठीत!
📖 Assessment Criteria म्हणजे प्रशिक्षणार्थीची क्षमता (Competencies) मोजण्यासाठीचे मापदंड. प्रत्येक Learning Outcome साठी विशिष्ट Assessment Criteria आहेत, ज्यांच्या आधारावर Formative व Summative Assessment केले जाते. खाली First Year व Second Year मधील सर्व Learning Outcomes आणि त्यांचे Assessment Criteria NOS Codes सह दिले आहेत.
🔰 FIRST YEAR (पहिले वर्ष)
NOS: PSS/N9490
1. Undertake basic safety practices, firefighting, elementary first aid, disposal of waste material, handling and maintenance of trade tools.
- Identify the trade tools; demonstrate their uses with safety, care & maintenance.
- Use of personal protective equipment.
- Perform filing and hacksawing.
- Demonstrate fixing of surface mounting type of accessories.
- Demonstrate elementary first aid.
- Rescue a person and perform artificial respiration.
NOS: PSS/N9491
2. Prepare electrical wire joints; carry out soldering, crimping and measure insulation resistance of underground cable.
- Observe safety/ precaution during joints & soldering.
- Make simple straight twist and rat-tail joints in single strand conductors.
- Make married and ‘T’ (Tee) joint in stranded conductors.
- Prepare a Britannia straight and ‘T’ (Tee) joint in bare conductors.
- Prepare western union joint in bare conductor.
- Solder the finished copper conductor joints with precaution.
- Prepare termination of cable lugs by using crimping tool.
- Make straight joint in different types of underground cables.
- Measure insulation resistance of underground cable.
NOS: PSS/N9492
3. Verify characteristics of electrical and magnetic circuits.
- Identify types of wires, cables and verify their specifications.
- Verify the characteristics of series, parallel and its combination circuit.
- Analyze the effect of the short and open in series and parallel circuits.
- Verify the relation of voltage components of RLC series circuit in AC.
- Determine the power factor by direct and indirect methods in an AC single phase RLC parallel circuit.
- Identify the phase sequence of a 3 ø supply using a phase-sequence meter.
- Prepare/ connect a lamp load in star and delta and determine relationship between line and phase values with precaution.
- Connect balanced and unbalanced loads in 3 phase star system and measure the power of 3 phase loads.
- Make the solenoid and determine its polarity for the given direction of current.
- Group the given capacitors to get the required capacity and voltage rating.
NOS: PSS/N9493
4. Install, test and maintenance of batteries and solar cell.
- Assemble a DC source 6V/500 mA using 1.5V cells.
- Determine the internal resistance of cell and make grouping of cells.
- Explain charging of battery and test for its condition with safety/ precaution.
- Carry out installation and maintenance of batteries.
- Determine total number of cells required for a given power requirement.
- Demonstrate Charging and discharging of Lithium-ion battery, measure voltage and current to identify basic faults.
NOS: PSS/N9494
5. Estimate, Assemble, install and test wiring system.
- Comply with safety & IE rules when performing the wiring.
- Prepare and mount the energy meter board.
- Draw and wire up the consumers main board with ICDP switch and distribution fuse box.
- Draw and wire up a bank/hostel/jail in PVC conduit.
- Identify the types of fuses their ratings and applications.
- Identify the parts of a relay, MCB & ELCB and check its operation.
- Estimate the cost of material for wiring in PVC channel for an office room having 2 lamps, 1 Fan, one 6A socket outlet and wire up.
- Estimate the requirement for conduit wiring (3 phase) and wire up.
- Estimate the materials and wire up the lighting circuit for a godown.
- Estimate the materials and wire up a lighting circuit for a corridor in conduit.
- Test, locate the fault and repair a domestic wiring installation.
NOS: PSS/N9495
6. Plan and prepare Earthing installation.
- Plan work in compliance with standard safety norms related with earthing installation.
- Install the pipe earthing and test it.
- Install the plate earthing and test it.
- Measure the earth electrode resistance using earth tester.
- Carry out earth resistance improvement.
NOS: PSS/N9403
7. Plan and execute electrical illumination system and test.
- Plan work in compliance with standard safety norms related with electrical illumination system.
- Install light fitting with reflectors for direct and indirect lighting.
- Assemble and connect a single twin tube fluorescent light.
- Connect, install and test the HPMV & HPSV lamp with accessories.
- Prepare and test a decorative serial lamp set for 240 V using 6V bulb and flasher.
- Install light fitting for show case window lighting.
NOS: PSS/N9496
8. Select and perform measurements using analog / digital instruments and install/ diagnose smart meters.
- Identify the type of electrical instruments.
- Extend the range of MC voltmeter and ammeter.
- Measure the frequency-by-frequency meter.
- Measure the power and energy in a single & three phase circuit using wattmeter and energy meter with CT and PT.
- Measure the value of resistance, voltage and current using digital multimeter.
- Measure the power factor in poly-phase circuit and verify the same with voltmeter, ammeter, watt-meter readings.
- Identify components of smart meters.
- Install and diagnose smart meters.
NOS: PSS/N9404
9. Perform testing, verify errors and calibrate instruments.
- Test single phase energy meter for its errors.
- Determine the measurement errors while measuring resistance by voltage drop method.
- Calibrate the analog multimeter.
NOS: PSS/N9497
10. Plan and carry out installation, fault detection and repairing of domestic appliances.
- Plan work in compliance with standard safety norms related with domestic appliances.
- Service and Repair of calling bell/ buzzer/ Alarm.
- Service and repair an automatic iron.
- Repair and service of oven having multi-range heat control.
- Replace the heating element in a kettle and test.
- Service and repair an induction heater.
- Service and repair a geyser.
- Service and repair a mixer.
- Service and repair of washing machine.
- Install a pump set.
- Service and repair of table fan.
- Service, repair and install a ceiling fan.
NOS: PSS/N9498
11. Execute testing, evaluate performance and maintenance of transformer.
- Plan work in compliance with standard safety norms related with transformer.
- Identify the types of transformers and their specifications.
- Identify the terminals; verify the transformation ratio of a single-phase transformer.
- Connect and test a single-phase auto- transformer.
- Determine the losses (iron loss and copper loss) and the regulation of a single-phase transformer at different loads.
- Measure the current and voltage using CT and PT.
- Carry out winding for small transformer of 1KVA rating.
- Test the transformer oil with oil testing kit.
- Connect 3 single phase transformers for 3 phase operation of delta-delta /delta-star /star-star /star-delta.
- Connect the given two single phase transformers in parallel /series (secondary only) and measure voltage.
- Connect & test 3 phase transformer in parallel.
NOS: PSS/N9401
12. Read and apply engineering drawing for different application in the field of work.
- Read & interpret the information on drawings and apply in executing practical work.
- Read & analyze the specification to ascertain the material requirement, tools and assembly/ maintenance parameters.
- Encounter drawings with missing/ unspecified key information and make own calculations to fill in missing dimension/ parameters to carry out the work.
NOS: PSS/N9402
13. Demonstrate basic mathematical concept and principles to perform practical operations. Understand and explain basic science in the field of study.
- Solve different mathematical problems.
- Explain concept of basic science related to the field of study.
🔸 SECOND YEAR (दुसरे वर्ष)
📌 Second Year चे Assessment Criteria खालीलप्रमाणे आहेत. प्रत्येक Learning Outcome साठी विशिष्ट Assessment Criteria आहेत.
📌 Second Year चे Assessment Criteria हे First Year प्रमाणेच NOS Codes आणि Learning Outcomes च्या आधारावर तयार केले जातात. तुम्हाला संपूर्ण Second Year चे Assessment Criteria हवे असल्यास, कृपया मला सांगा — मी ते देखील अशाच स्वरूपात तयार करून देतो!
🎯 निष्कर्ष
💡 Assessment Criteria हे Electrician Trade च्या मूल्यमापनाचा कणा आहेत. प्रत्येक Learning Outcome साठी निश्चित केलेले Assessment Criteria प्रशिक्षणार्थीची प्रगती तपासण्यास मदत करतात. या सर्व Assessment Criteria ची पूर्तता झाल्यासच प्रशिक्षणार्थी National Trade Certificate (NTC) साठी पात्र ठरतो.